
An-225 Mriya - Kit Card - Lượn quãng ngắn
- Downloads
- 112
- Likes
- 20
- Views
- 766
- Remixes
- 0
- Comments
- 0
Files 1 679.9 KB
- Antonov-225-Kit_Card_1776835419.stlSTL · 679.9 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #325646
- Category
- Xe Cộ - Máy Móc
- Published
Description
I made this a while back, and thought I could post it for people to print and what they say about it
Depending on your tolerances, you may need to use glue to attach the wings to the fuselage
Since you may get blobs, you may want to remove them for piece connecting to the fuselage-
remove material on the fuselage cutout - remove as desired until you get to fit.
You may use glue on connecting the wings, but angle them a bit upwards - gluing the fuselage is optional, but if you need to glue it, go ahead.
For filament that are good quality, like ESUN, you should use glue for all attachments, and attach the wing to the connecter, then facing up, connect the fuselage, wings touch the surface, fuselage is in the air.
If you have any more concerns then inform me in the comments - or you have trouble.
It is able to glide a bit - remove the engines and make the CG balanced
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 679.9 KB
- Largest file
- 679.9 KB












