#0040 Kẹp Ống CPAP – 8 Biến Thể

I saw a clip design that reminded me I needed a hose clip for my CPAP to prevent the hose from scraping the ground and making noises during my sleep.  I keep my CPAP in my night stand drawer to minimize clutter so a hose clip on the side of my night stand makes sense.

Versions Included – 2 sizes - 18mm hose clip and 19mm hose clip, both with these variants:

• WSWN = with screw hole, with nub (keeps the hose from sliding)
• NSWN  = no screw hole, with nub (keeps the hose from sliding)
• WSNN  = with screw hole, no nub (allows the hose to slide)
• NSNN   = no screw hole, no nub (allows the hose to slide)

Notes:

• Screw hole provided is intended for an M4 flat head.
• Pad size is 22 x 28mm, so you can apply double stick tape of your choice. I use a 3M VHB tape that's commonly available.

Recommendations:

1. PLA works well for this application
2. Print the clip laying on its side for maximum strength.
3. 2 vertical walls should work fine, 12%+ gyroid infill
4. Due to the small contact area to the bed, you may need a brim of 2-3mm for bed adhesion.

If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!

Let me know if there is another common hose diameter and I can add it here. 

Remember, you can earn some Prusameters if you post a pic of your make!  Plus, it would make my day to see it. ;-D

Happy Printing! (and sleeping)