
Revo Nozzle Holder - Bộ giữ nozzle E3D Revo dạng module cho Prusa
- Downloads
- 341
- Likes
- 80
- Views
- 2,053
- Remixes
- 0
- Comments
- 0
Files 6 2.4 MB
- NozzleClip-Pair-2Part_1776773044.3MF3MF · 252.8 KB
- NozzleClip-Pair-SinglePart_1776773044.3MF3MF · 252.4 KB
- NozzleClip-Pair-2Part_1776773045.STLSTL · 958.2 KB
- NozzleClip-Pair-SinglePart_1776773046.STLSTL · 956.4 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #322335
- Category
- Máy In 3D
- Published
Description
My design for a modular E3D Revo nozzle holder.
I wanted something that fitted to my printer (PrusaMK3s), wasn't too large, could take at least 3 nozzles and looked a bit funky.
UPDATE - This design has been expanded and is now compatible with my magnetic reverse bowden system - see picture below. Link: https://www.printables.com/model/465985-magnetic-reverse-bowden-system
Each clip will hold one Revo nozzle, and a short and a long clip pair will tile together. You can expand to include a home for as many or as few nozzles as you have.
There are three files;
- A pair of clips - long and short
- A pair of clips - with attachment for a separate coloured hex insert
- and a separate hex top insert
There are .stl and .3mf versions of each.
The nozzles themselves are modeled up here: https://www.printables.com/model/293971-e3d-revo-nozzles
The ‘back’ holders are 2mm taller than the front ones to give a staggered appearance, and the 2-part versions are each 1mm taller than their single-body counterparts. They are all interchangeable and will all tessellate together fine.
You will need to arrange the files for printing, but that should be pretty straight forward. I would suggest printing in pairs though. Everything prints fine without supports, and I did mine on a 0.2 layer height.
If you are doing the two colour variant, use a few drops of superglue to fix the hex insert in.
It would be cool to colour-match the hexagons to the Nozzle socks, but I didn't have yellow or green. Prusa orange looked the part for me though!
This system is also fully compatible with a reverse bowden setup I've drawn up. Link here if anybody is interested. https://www.printables.com/model/465985-magnetic-reverse-bowden-system
Print spec
- Formats
- 3mfstl
- Model files
- 6
- Total size
- 2.4 MB
- Largest file
- 958.2 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-
New -

-

-

-
New -

-


