Giá đỡ ZWO Cooled Camera 78mm

ZWO Cooled Camera Holder 78mm with Guide scope and Accessory Holders

Fits many ZWO cooled cameras and others with an OD of 78mm like the ASI533MC and ASI294MC, then simply attach your DSLR lens to the front with the appropriate adapter.

I tried finding one of these before designing my own, they all seemed flimzy or just didn't suit my needs. I wanted a robust and more secure holder since it will be hanging onto a couple of thousand dollars worth of my astro gear.

There are two versions here, one with a slight relief in the ID to fit some thin self adhesive felt paper and the other no felt protector so a snug fit without the felt paper.

The camera vents are NOT covered in any way.

The guide scope holder has two M6 bolts attaching it and slicking up out of the plate to allow 'extra' protection for any slip on that mount. The side accessory plate can be used for anything. I use an old Asiair v1 so I just velco it on that small plate 

I printed in PETG with 4 walls and 50% infill

You will need;
MAIN RING
2x M6x25mm +  2x M6 Hex Nuts (dovetail to main rings)
2x M6x30mm + 2x M6 Hex Nuts (ring main securing nuts)

GUIDESCOPE PLATE
2x M6x8mm bolts
2x M6*10*7 Brass Nuts Embedment Knurled Insert
4x M3x16mm Knuckle Head Bolts + 4x M3 Hex Nuts

ACCESSORY PLATE
2x M4x8mm bolts
2x M4*8*6 Brass Nuts Embedment Knurled Insert
Adhesive Velcro