
Bản cập nhật riser nắp K1/K1C 60mm kèm geared vents
Remix of Creality K1, Nu-K Riser By Way2Do_572111
- Downloads
- 599
- Likes
- 70
- Views
- 2,637
- Remixes
- 0
- Comments
- 0
Files 15 8.1 MB
- 60mm_Rear_Riser_Panel_1776776869.stlSTL · 527.3 KB
- 60mm_Riser_Corner_1776776871.stlSTL · 172.8 KB
- 60mm_Vented_Riser_Panel_1776776871.stlSTL · 2 MB
- Rack_Cover_1776776873.stlSTL · 22.7 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #322101
- Category
- Máy In 3D
- Published
Description
Printing
I printed all components on the K1C itself. Panels and corners are designed to be printed stood up - you will need to orient the panels diagonally on the build plate to get them to print - they should not be scaled. With your bridging dialed in, no support is necessary. I printed them with 3 walls and 15% infill in ABS.
The closures and nobs were printed in PLA.
All other components are solid
Notes:
When assembling the vent panels, bear in mind that you might need to reverse the rack or adjust the orientation of closures to get the best results.
I moved the original screws to the top of the corners for the lid & magnets to snap to, and used M3 cap heads to fix the corners to the printer.
I also decided that in order to improve the path of the PTFE tube, to extract it from the cable chain (see photo)
UPDATE:
I've added a slightly tapered corner to ease the fit of the lid.
Print spec
- Formats
- stepstl
- Model files
- 15
- Total size
- 8.1 MB
- Largest file
- 2 MB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -
New -

-

-
New -
New -

-


