Skip to main content
F3D
Cắm cho lỗ filament của eSUN eBox/eBox Lite 1

4 images

Máy In 3D

Cắm cho lỗ filament của eSUN eBox/eBox Lite

Remix of Phụ kiện eSun eBox cho ống dẫn 4mm By Duane

By Siff3D

Downloads
105
Likes
12
Views
630
Comments
5

Files 5 1.8 MB

  • eSUN_eBox_Plug_v3_0.4n_0.2mm_PETG_MK3S_16m_1765657951.gcodeGCODE · 428.5 KB
  • eSUN_eBox_Plug_v11_0.4n_0.2mm_PETG_MK3S_13m_1765657952.gcodeGCODE · 369.5 KB
  • eSUN_eBox_Plug_v3_1765657949.stlSTL · 498 KB
  • eSUN_eBox_Plug_v11_1765657950.stepSTEP · 129.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is a plug for the filament hole on the eSUN eBox/eBox Lite when used “only” as a dehydrator, e.g. when to dry filament for storage or to dry desiccant.

This is based on Duane's “eSun eBox Fittings” model.

Update 20230731: New, version with better fit (v11). This version has a slight curve of the top part and a narrower opening at the bottom. This makes the plug to stay attached to the base of the box when the lid is opened. No need for supports

Update 20230927: New images (with dried filament 😊)

Print Settings

Printer:    Prusa i3 MK3S+
Rafts:      No
Supports:   No, but I used the opportunity to try organics supports out! 😊
Resolution: 0.2
Infill:     30%
Infill type: Honeycomb
Filament:   PETG

Printed in: Prusament Jet Black PETG

Notes:
Perimeters 5; Bottom and Top solid layers: 4. The perimeters and the infill are to prevent the plug from breaking when removing the supports. If you don't use supports, then your default number of perimeters should be perfectly fine.

Read more Show less

Print spec

Formats
gcodestepstl
Model files
5
Total size
1.8 MB
Largest file
498 KB

5 comments

See all