
Ống gió quạt 5015 cho Hemera (bản cải tiến)
- Downloads
- 147
- Likes
- 11
- Views
- 1,010
- Remixes
- 0
- Comments
- 0
Files 5 4.8 MB
- fan-duct-hemera_v1_1776755897.stepSTEP · 833.3 KB
- fan-duct-hemera_v1_1776755899.stlSTL · 866.5 KB
- fan-duct-hemera_v1_1776755900.f3dF3D · 1.2 MB
- fan-duct-hemera_v1_v2_1776755901.stlSTL · 796.1 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #321493
- Category
- Máy In 3D
- Published
Description
New Version Avalible
https://www.printables.com/model/976980-hemera-cooling-duct
The new version takes lessons learned from this model and incorperates a better duct design and saves space while supporting BL-TOUCH and CR-TOUCH probes. (works with 5015 Silencer)
----------------------------------------------------------------------------------------------------------------
Update notes (2024/08/18)
This model is at End of life.
You can still download it, modify it, etc. I won't be working on this design anymore
Description:
this model fits onto an existing E3D hemera, using 3 hardpoints on the toolhead and blowing air under the nozzle
UPDATE NOTES (for version 2)
- made mounting holes adjustable
- optimized downward flow
How to install:
Use 3, M3x6 or M3x7 bolts to secure the shroud to the hemera. check alignment and install the 5015 blower fan with a M3x20 screw, the screw will cut it's own thread.
Printing:
Use a high temperature material like ASA, ABS, or nylon. don't go crazy on infill.
IF USING PLA:
Be warned that the shroud will deform over time, set an idle fan speed of 20% when the hotend is at printing temperature, otherwise it will droop and collide with your parts.
Keep in mind that the original design is no longer available, it appears to have been removed from printables, let me know if you need the documentation for the original design.
Print spec
- Formats
- f3dstepstl
- Model files
- 5
- Total size
- 4.8 MB
- Largest file
- 1.2 MB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -
New -

-
New -
New -

-

-


