Bộ Adaptor Router cho Makita/Festool Guide Track

This model allows a (plunge) router, fitted with a 30mm guide bush, to be run along a Makita or Festool guide rail.  The router mount is drilled, in addition, to attach directly to the Makita trim router plunge base, and to the Hitachi M12V2 router.  A locator (2 required) positions the track so that the router cutter is centred between the rows of a standard MFT.

The .step file is included.

There are 2 components to the guide itself:

1. The router mount (Router guide (1).stl). 
2. The rail guide (Track Slide.stl)

The two parts are printed separately, top face down.  Then no supports are required.  They are fixed together with M4 csk screws into heat-set threaded inserts.

The locator is printed as a single piece, top face down.  The hole in the locating peg takes an M8 screw, to strengthen the peg.