Ngăn kéo nhỏ để bàn (Small Desktop Drawer)

Hi,
this is a little Drawer to store small things, e.g. Jewlery or USB Sticks. I attached the STEP Files so you can modify the drawer itself if needed. The Drawers have end stops so if assembled correctly they won't fall out. 

Printing:

First split the STL into Objects and print the parts seperately. For the main body print it lying on the back. The drawers should be printed with the open side facing upwards, same goes for the handles. All the parts are made to be printed without Support but the cut out for the handle might need some if your printer can't handle bridging very well.

Assembly:

Start with the first drawer on the top. Slide the drawer into the main body. Take your end stops and glue them in from underneathe the drawer. It's easier to fit the stops if u turn the drawer upside down. Continue with the rest of the drawers working your way from top to bottom. last step is to glue the handels onto the drawers.

PS:

The drawers in the assembly have little rails I needed for my usecase so I added drawers with a flat surface. Please share your makes and tell me if you want any changes .