
Móc Treo Tường Skateboard/Longboard - Mỏng Gọn & Siêu Chắc
- Downloads
- 260
- Likes
- 35
- Views
- 823
- Remixes
- 0
- Comments
- 0
Files 3 942 KB
- Skate-Longboard_Hanger_1776700520.stlSTL · 235.5 KB
- Skate-Longboard_Hanger_Pair_1776700521.stlSTL · 471 KB
- Skate-Longboard_Hanger_25mm_1776700522.stlSTL · 235.5 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #318569
- Category
- Thể Thao & Ngoài Trời
- Published
Description
Hi there, here is my skateboard/longboard wall hanger that was designed to fit into a tight space behind my apartment door. The model is light-weight, prints relatively fast and is strong where it needs to be.
I would recommend printing this in PETG if available, but I have also included a 25mm wide version for those who only have PLA.
Print Settings: 0.2mm layer height
PETG - 4 walls, 8-10% infill for general print settings. Create two modifiers (see photo or right click part, add a cube modifier (55x20*20mm) placing them as shown in the photo and set infill strength to 25-30% for both. Organic tree supports added as shown.
PLA - Download the 25mm version, add two cube modifiers to the area shown in the photo and set their infill percentage to 30%. (55x25x25mm) I would use 6 walls for maximum strength and 10% infill for the rest with organic tree supports as shown. PLA can be susceptible to creep over time so the stronger the better.
Materials needed - 2x standard drywall/GIB anchors and screws per hangar, mine were pretty overkill. Screws are spaced vertically at 70mm apart and I would eyeball the horizontal to be inside your trucks.
Print spec
- Formats
- stl
- Model files
- 3
- Total size
- 942 KB
- Largest file
- 471 KB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-

-

-

-

-

-

-


