
Bát giữ Dial Indicator cải tiến cho Neptune 4 Max (20x20 extrusion)
Remix of Gá đồng hồ so cho Neptune 4 Max (nhôm định hình 20x20) - DEPRECATED By JackFrost
- Downloads
- 127
- Likes
- 8
- Views
- 541
- Remixes
- 0
- Comments
- 0
Files 4 2.1 MB
- Dial_Indicator_Holder_v3_-_Indicator_Mount_1776671983.stlSTL · 1.5 MB
- Dial_Indicator_Holder_v3_-_Indicator_Mount_1776671984.3mf3MF · 459.6 KB
- Dial_Indicator_Holder_v3_-_Indicator_Mount_1776671985.stepSTEP · 108.6 KB
- Dial_Indicator_Holder_v3_-_Indicator_Mount_1776671986.sldprtSLDPRT · 49.5 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #317159
- Category
- Máy In 3D
- Published
Description
What:
I wanted to improve my last design in my new CAD program Onshape. I beveled the whole design and increased the strength. I also added improvements to the Variables so that anyone can just plug in their use case dimensions.
Why:
I wanted to improve the last design as my last wore out.
How:
Modeled in ONSHAPE
Print Settings:
Important settings will be marked with Orange color *All Settings are a suggestion but what it was designed for
Layer Height:
0.4mm
Nozzle:
0.6mm
Infill:
15%
Infill Type:
Gyroid
Material:
PETG
Supports:
No
Vertical Shells:
2
Raft/Brim:
No
Stats:
Mass:
12 g
Volume:
9239.88 mm³
Surface Area:
5417.9 mm²
CAD variable table
InnerBoxWidth
19.225 mm
X Direction. Should be your extrusion size -1mm
InnerBoxHeigth
20 mm
Y Direction.Should be your extrusion size.
InnerBoxThickness
18.034 mm
Z Direction
ProngHeigth
5.500 mm
Y Direction
TailWidth
3.125 mm
X Direction. Change if to bendy. also increases clamping pressure
TailHeigth
34.500 mm
Y Direction. how low the dial should be
BumpWidth
5.450 mm
X Direction. Extrusion protruding bumps Width
BumpHeigth
2mm
Change this if mount is falling off
Vally
1.042mm
Calculated. do not change
DialGaugeDiameter
8mm
Insert the diameter of your dial gauge throat
DialEngagment
15 mm
How much collar there is to hold dial. cannot be less than thickness
DialEngagmentThickness
2 mm
How thick the collar is. change if your dial is heavy.
Print spec
- Formats
- 3mfsldprtstepstl
- Model files
- 4
- Total size
- 2.1 MB
- Largest file
- 1.5 MB
0 comments
You may also like 12 models
See all-

-

-

-
New -
New -

-
New -

-

-

-

-

