
Giá đỡ ly kẹp cho IKEA RÅSKOG (Raskog Cup Holders)
- Downloads
- 176
- Likes
- 74
- Views
- 1,393
- Remixes
- 0
- Comments
- 0
Files 18 16.3 MB
- Raskog_100mm_Double_Cup_Holder_1776651983.f3dF3D · 226.4 KB
- Raskog_100mm_Single_Cup_Holder_1776651984.f3dF3D · 228.6 KB
- Raskog_80mm_Double_Cup_Holder_1776651985.f3dF3D · 231.2 KB
- Raskog_80mm_Single_Cup_Holder_1776651986.f3dF3D · 236 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #316152
- Category
- Đồ Gia Dụng
- Published
Description
I believe this should work for both the RASKOG and RASHULT utility carts from IKEA but have not confirmed on the RÅSHULT.
I designed the bolt holes to accommodate M5x18mm SHCS or BHCS, but 16mm should work fine and 20mm would just stick out a bit more.
I used six M5x10mm heat set threaded inserts for the clamp block. The inserts could be left out and longer bolts could be easily used with nuts instead.
STEP files and Fusion360 archive files provided for each basic version. If I were to design it again, I would try to put the inserts into the cup holder side and have the bolts come from the clamp block.
Mine was printed with Polymaker Polylite PLA Pro Bronze on an Ender 3 Pro with a Micro Swiss NG extruder/hot end.
UPDATE: The original files are 80mm tall, I have now added a 100mm tall version of the double 100mm version.
Print spec
- Formats
- f3dstepstl
- Model files
- 18
- Total size
- 16.3 MB
- Largest file
- 3 MB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -

-
New -

-
New -

-

-
New

