Thùng Rác (Trash Can)

Trash Can with separate Lid or as a Solid Model

Original design for the 2024 Christmas Community Print Drive.

Two versions are included: Solid Model and Bottom/Lid version with two parts. My kids insisted that I create the design that opens after I started with the solid version. The lid prints without supports by bridging across the opening that goes around the brim of the open can.

More Models: Collection of all approved 2024 Christmas Community Print Drive models 

More Options: More sizes that fit inside each other available at @Cults3D:
https://cults3d.com/en/3d-model/various/trash-can-abbymath

Additional Information and Print Settings

The model is approximately 55 x 55 x 71 mm. I printed with 0.25 mm layer height, 2 perimeters, 3 top and bottom layers, and 15% infill. No supports. No raft.

If you are printing for the Community Print Drive, be sure to use the appropriate guidelines:
2024 Christmas Community Print Drive Printing Guidelines

More of my designs on Cults3D: https://cults3d.com/en/users/abbymath

Not for commercial use. No derivatives. See license below.

Note: Most photos from earlier, smaller model. Print Drive standard models are posted here.