Skip to main content
F3D
Prusa Mini RHD Fan Duct Rev. C 1

4 images

Máy In 3D

Prusa Mini RHD Fan Duct Rev. C

By Ogland

Downloads
2,343
Likes
449
Views
17,036

Files 5 3 MB

  • rhd_nozzle_c_prusa_mini_lowered_1776606512.stlSTL · 955.3 KB
  • mini_r2_minda_holder-rhd_nozzle_c_prusa_mini_1776606513.stlSTL · 499.5 KB
  • rhd_nozzle_c_prusa_mini_1776606514.stepSTEP · 669.4 KB
  • rhd_nozzle_c_prusa_mini_r2_1776606514.stepSTEP · 774.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

A remix of the fantastic RH_Dreambox fan shroud for MK3 to fit the prusa mini. Files fitting both original Mini and Rev 2 included.

https://www.thingiverse.com/thing:3249344

EDIT 2021-02-16
The shroud has been lowered 3 mm because it sat too high before. Should work better.

Instructions:

  1. Print the fan shroud in at least PETG but preferably ABS or PC if you're gonna print anything else than PLA with it.

I have included a modded R2 MINDA holder which doesn't obstruct the shroud, so print that too if you're using R2.

  1. Cut the zip tie at the X carriage holding the cable bundle.

  2. Remove the one M3x20 screw holding the 5015 part cooling fan along with the M3 nut on the other side of the fan.

  3. Fasten the shroud to the heatsink using the M3x8 screw.

  4. Fasten the 5015 fan to the shroud using the M3x20 screw you salvaged from the previous position and the M3 nut.

  5. Fasten the modified minda rev2 holder.

  6. Zip tie the cable bundle again.

  7. Happy printing!

(extended) Bill of materials:
1x M3x8
1x Zip tie

Credits:
Prusa Research
RH_Dreambox
Thanks anonymous community member for the great work of adapting the MINDA holder to retain the cooling performance as best as possible. Also for the comparison photos.

Read more Show less

Print spec

Formats
stepstl
Model files
5
Total size
3 MB
Largest file
955.3 KB

0 comments

See all