FakeGoose Stick Clip

You need a thin ¼-20 nut and a bolt.

No support material should be required. You may need to rotate before printing.

Attaches to a painter's pole or similar thread.

The “pole adapter” will likely break where it attaches to the other part. The swivel will constantly come loose. This is not a good design. Got me through a few weird hangers that the SuperClip couldn't handle though!

Do not trust your life to plastic gear. Buy the real thing. It's nice.

Improvement ideas:

• Add some angular features in the swivel to index at various angles
• Invert the screw arrangement and use a hex bolt an wing-nut
• Make angled feature on pole adapter twice as thick

2022/04/06: Updated. Accidentally uploaded an older version of this.