
Adapter vành cho van Presta (khoan theo chuẩn Schrader)
- Downloads
- 113
- Likes
- 16
- Views
- 712
- Remixes
- 0
- Comments
- 0
Files 4 2.5 MB
- ADAPTER_PRESTA_VALVE_TO_SCHRADER_RIM_1776570481.iptIPT · 94.5 KB
- ADAPTER_PRESTA_VALVE_TO_SCHRADER_RIM_1776570481.stlSTL · 156.3 KB
- ADAPTER_PRESTA_VALVE_TO_SCHRADER_RIM_1776570482.3mf3MF · 47.7 KB
- ADAPTER_PRESTA_VALVE_TO_SCHRADER_RIM_0.05mm_PETG_MK3S_20m_1776570483.gcodeGCODE · 2.2 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #312276
- Category
- Đồ Gia Dụng
- Published
Description
Based on the Wheels Manufacturing PSS-1, whose measurements are posted as follows:
- Length: 11.4mm
- Outer Diameter: 8.2mm / 9.3mm
- Inner Diameter: 6.15mm
I guessed the flange to be 2 mm tall.
First print came out too small on the ID & the OD, but it worked for my rim which the last owner drilled by hand - unlikely to be the same size as a true Schrader drilled valve hole.
You may need to edit the IPT file to fine tune the diameters, or even the length depending on the depth of your rim (i.e. aero rims).
I didn't feel like printing it again, so I used a letter B drill bit to ream out the hole to size.
Category: Replacement Parts
Print spec
- Formats
- 3mfgcodeiptstl
- Model files
- 4
- Total size
- 2.5 MB
- Largest file
- 2.2 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-

-

-
New -

-


