Giá đỡ cho Switch POE TP-Link nhỏ gọn

Printed in PLA at 0.2mm layer height, 30% infill, and no supports.  Note that the attached Gcode file is for a 0.6mm nozzle. The Openscad code is below in case you have a different size switch:

// Clip for Structured Media Cabinet shelf for TP Link POE LAN switch

// Import original file

translate([3.13,-22,-116.3])
   import("C:\\Users\\<username>\\Desktop\\3D Printing\\clip_v0.stl");

// Create addition stop for narrower switch

translate([0.1,-47+28,-0.0]) // The +28 is the width in mm of the opening
   difference(){
   translate([3.13,-22,-116.3])
       import("C:\\Users\\<username>\\Desktop\\3D Printing\\clip_v0.stl");
   translate([-0.1,-1,-1])
       cube([10,70,20]);
   translate([-20,0,-1])
       cube(20);
   }

// fill a part of the logo under the stop

translate([0,36,0])
   cube([2,10,12]);