
Giá treo lồng ôm sát Mac Studio dưới gầm bàn
- Downloads
- 131
- Likes
- 14
- Views
- 689
- Remixes
- 0
- Comments
- 0
Files 1 12.4 MB
- macStudioCage_1776562621.stlSTL · 12.4 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #311818
- Category
- Dụng Cụ Tiện Ích
- Published
Description
I wanted to move my Mac Studio off my desk top and out of sight, so I designed this snug-fitting cage in Plasticity 3D to securely hold it in place underneath.
The cage is designed to be strong but use a minimal amount of filament and provide un-restricted access to all ports including the front SD-card slot and USB-C ports. It's a vertical design which also proves good airflow for the intake and rear fan exhaust.
I've provided 8 counter-sunk screw holes on the upper surface to secure the attachment to the desk. I used 4 screws in my installation as this proved strong enough but you can use as many as you feel comfortable with.
Printing tips:
- This print maximises space on the print bed of my MK3S+.
- Switch to ‘snug-supports’ - this will minimise filament and support overhang.
- Make any brim internal only.
- Make skirt rows 0 - this should prevent any conflicting tool-paths outside the bed.
- Follow the orientation in the slicer screenshot to fit on the bed and for strength.
- I used 40% infill which proved strong enough to hold the weight of the Mac without any sagging or deformation.
I printed in Silver PLA Prusament at a layer height of 0.2mm (Quality). This resulted in an 18 hour printed requiring minimal cleanup and support removal.
Enjoy!
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 12.4 MB
- Largest file
- 12.4 MB












