Skip to main content
F3D
Hệ Anten Helix 2.4GHz Dual Feed LNB System V2 - QO100 1

7 images

Giáo Dục

Hệ Anten Helix 2.4GHz Dual Feed LNB System V2 - QO100

By DM4DS

Downloads
223
Likes
11
Views
1,490

Files 9 34.4 MB

  • Dual_Feed_Base_DM4DS_v2_1776535937.stlSTL · 6 MB
  • Dual_Feed_Helix_Cover_DM4DS_v2_1776535939.stlSTL · 7.8 MB
  • Universal_Screw_LNB_Helix_Holder_v3_Diavolo_1776535941.stlSTL · 3.2 MB
  • Universal_Screw_LNB_Helix_Holder_v2_5mm_1776535943.stlSTL · 3.2 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

IF YOU MISS SOMETHING - LOOK in the original V1 package. There are multiple Helix Holders, multiple bend helper for different diameter and so on. I dont wanted to just copy everything here.

So, now to the V2:

Hi,

this is the V2 version of my original design (https://www.printables.com/de/model/389071-holy-the-original-qo-100-24ghz-2-45-turn-helix-dua), released in 2019 @ the QO100 - public opening. 

Major Difference?
No Thread - now a fast open/close mechanism
MUCH easier to print, because NO SUPPORT NEEDED!

How does the clamping now work?
The part has theoretical split to make a hinge - Printed without support.
The split is wide enough to work, but small enough it needs no support.
After the print is finished and cooled, just “move” it a little bit and it frees up, ready to use!

Why?
because I can :) But really? The Threaded part was for some users a pita to print.

Compatible with old parts?
YES! You can use your old reflector (you find dxf etc in the V1 package!!!) and helix holder. No need to build a new metal reflector or print a new helix holder.

The holes in the helix holder are following the helix! So no ugly fiddeling the wire into it. Bend the wire with the helper and go :)

Other Changes?
also Yes. I made the cover a little bit longer to fit 4.5 turns not so flush with the cover or even to put 4.75-5 turns under it. The extra weight and lever is so lo, so why not.

I am sure to release more covers, but for now, this is the only one. Time is my problem. If you pay me, i can spend more time on it. No payment, I can only work on it at my free time, which is almost non-existend :( It is like it is.

You have no idea how to bend the HELIX?
https://www.printables.com/model/389065-bend-helper-vor-helix-antennas/files

You need another length cover? Maybe for a 2 turn? Feel free to make your own or ASK !

Happy printing

Sandor - DM4DS

Thanks for supporting me:

Patreon: https://www.patreon.com/dm4ds
Paypal donation: https://www.paypal.com/paypalme/dm4ds
BMAcoffee: https://buymeacoff.ee/dm4ds
Bitcoin: bc1qf426e46h6kdtmws4cjnu6wa3wtzy8qvctq9j9u
Etherium: 0x3447f956194706eCDab747314CFB92Bf55428F28

Read more Show less

Print spec

Formats
stl
Model files
9
Total size
34.4 MB
Largest file
7.8 MB

0 comments

See all