Skip to main content
F3D
Ngàm gắn Stealthburner cho Ender 3 V2 kèm CR Touch 1

6 images

Máy In 3D

Ngàm gắn Stealthburner cho Ender 3 V2 kèm CR Touch

Remix of Ender 3 V2 - Chuyển đổi VORON Stealthburner By WouterE_

By lanwanman

Downloads
116
Likes
16
Views
1,005

Files 3 6.4 MB

  • Ender_3_V2_Mount_1776502984.stepSTEP · 5 MB
  • Conversion_Plate_1776502986.stlSTL · 1.3 MB
  • Spacer_1776502987.stlSTL · 87 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Stealthburner can be found on the Voron website:
https://vorondesign.com/voron_stealthburner

Hardware needed:
6 M3 threaded inserts to mount the Stealthburner to the adapter. (See attached picture for mounting location.)
4 M3x8 SHCS bolts to mount the adapter to the Ender 3 V2 x-axis carriage. 
2 M3x20 SHCS bolts with M3 Nuts to attach the CR Touch.

STEP file is provided if you need a closer look of where the hardware is installed.

The offsets for the CR Touch are X: 0 Y: 22

Printing orientation should be fine as is. Parts should be printed in ABS or ASA following the Voron recommendation. (PETG might work, but not recommended.)

WARNING: You will lose around 20mm of usable printing area in the y axis due to the Stealthburner sticking out forward more than the standard Ender 3 V2 hotend. Make sure you properly set the position_max on all your axis to avoid damage to the printer.

Read more Show less

Print spec

Formats
stepstl
Model files
3
Total size
6.4 MB
Largest file
5 MB

0 comments

See all