Vỏ ESP32 Cam - Bản HSW Edition

This was based on the following ESP32Cam and Dev board and Antenna:

https://www.aliexpress.com/item/1005006299363624.html?spm=a2g0o.order_list.order_list_main.94.1b161802uMH60u

Case prints in two pieces front and back and are seated together. There are 3 holes for mounting the Antenna in various positions, there is a simple mount which holds the cam and you can screw into whatever you want to mount it onto.

I included some vents as I noticed in a ealier itteration it was getting a bit hot, this seems to have solved the issue.
 

• Example printed in PETG, with 25% infill. 
• Front prints with no supports
• Rear may need some supports around the antenna holes.
• To make it fit neatly in the case wrap the antenna cable around the dev board headers as per below image:
   

Feedback is always appreciated, I do have a couple of alternative mounts I will add soon, including one to attached to HSW. Happy Printing.
 

Change Log

• EDIT 06/11/24* - Added HoneyComb Wall (HSW) Mount for the Cam Case - No Supports required