Giá đỡ hotend Trianglelab CHC Pro cho hệ sinh thái EVA3

This is a remix based on https://www.printables.com/model/214126-eva3-dragon-hotend-mount-hex that allows to use a Trianglelab CHC Pro hotend setup with the standard EVA3 carriage assembly that can be found here https://main.eva-3d.page/ developed by Paweł Kucmus.

This setup is based on a variant of the E3D v6 Heatsink that does not have the collar but instead uses the Dragon style threaded mount. This mod also allows the use of the standard EVA3 fanduct and not the volcano one, and uses the heat insert to be mounted. Here the full BOM list to build a great hotend for abrasive material, everything can be found on aliexpress:

• CHC Pro Heatblock PT1000 variant https://it.aliexpress.com/item/1005003936528202.html or the standard Thermistor variant https://it.aliexpress.com/item/1005004224332574.html
• E3D style Titanium Heatbreak https://it.aliexpress.com/item/32853548000.html
• E3D Heatsink with Dragon style threaded mount https://it.aliexpress.com/item/1005004847778537.html

This heatsink is non-standard E3D dimensions but instead is 21mm wide, so this mount takes care of that also.

It's extremely easy to print, best with 4 perimeters - 4 bottom layer - 5 top layer, no bridges or supports needed, uses poly holes for the heat inserts and pokey holes for the screws.