
Keycap Kailh Choc 15x15 (Minimal Spaced)
Remix of Keycap Choc Louder (Choc & MX Spacing) By koozie
- Downloads
- 157
- Likes
- 20
- Views
- 972
- Remixes
- 0
- Comments
- 0
Files 2 1.4 MB
- minspaced-choc-keycap_1776491220.stepSTEP · 926.2 KB
- minspaced-choc-keycap_1776491221.stlSTL · 518.1 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #308160
- Category
- Dụng Cụ Tiện Ích
- Published
- License
- Creative Commons — Attribution
Description
What Is This?
There's a dire lack of FDM printable Kailh Choc keycaps that work on mininum spaced boards, such as the minimally spaced version of @kilipan's excellent Zilpzalp. I wanted to fill this keycap void, and also design a keycap for my keychain macropad.
3D Printing Instructions
You can print this on any FDM printer with a 0.4 (or smaller) nozzle, with the lowest layer height your printer and nozzle can go to. The settings I used are are follows:
- 0.08 layer height
- 0.44 line width (110% of nozzle)
- 100% infill
- Oriented on one of the outer edges of the keycap
- Brim and supports are enabled
Inspirations
I was heavily inspired by the "wrk." keycaps, designed and sold by WORK LOUDER. In addition, @koozie's Choc Louder keycaps showed to me that a keycap in that style can be FDM printed successfully.
Print spec
- Formats
- stepstl
- Model files
- 2
- Total size
- 1.4 MB
- Largest file
- 926.2 KB












