Skip to main content
F3D
Frayed Knot: blaster bắn foam dart kiểu stringer cho nerfyn… 1

2 images

Đồ Chơi Ngoài Trời

Frayed Knot: blaster bắn foam dart kiểu stringer cho nerfyness

Remix of Low Hardware Talon Claw U (LHTCU) - Mẫu Blaster In 3D Không Cần Ốc By Sillybutts

By gargunkle

Downloads
127
Likes
49
Views
3,364

Files 10 2.1 MB

  • primingBar_1776487340.stlSTL · 23.8 KB
  • sear_1776487341.stlSTL · 73 KB
  • plunger_1776487342.stlSTL · 251.3 KB
  • ptBack_1776487344.stlSTL · 382.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#307966
Published

Description

**** UPDATE 2024-10-11 ****

Based on updates to this ecosystem that I made for the Low Hardware Mini Claw, I've done similar much-needed updates to the Frayed Knot!  It is now suitable to consider this a production release, version 1.0!

This product is licensed for personal use only.  Please do not sell it!  If you'd like to buy a prebuilt, please visit Gryphons And More on etsy!  (Gryphons And More is a licensed producer of Designs by Sillybutts.)

Not strictly related to the blaster update itself, but I am also including a singular U-channel model for the sides of the blaster, since I can fit that in one piece on my Bambu.  :)

**** ORIGINAL RELEASE BELOW ****

This is a set of remixed parts as a variation of the LHTCU/LHTCUBL to let you use a shorter 4" plunger tube and elastic strings / shock cord.  It's sort of the LHTCU combined with the Esper.  

It's probably not perfect but IMO it is pretty good.

It should be compatible with the printed plunger tube of the LHTCU if you resize it to 101.6mm / 4" long.

The way this works is you knot the shock cords and hold their knots in the little divots at the front of the magwell.  As long as the cords are under a small amount of tension by default, it should hold fine.

It's currently only compatible with real 16mm OD ish barrels rather than the original printed barrel.

It should be compatible with the various stock additions of this blaster family, though I'm using it without a real stock.

I can get three strings on here easily.  I intended it to allow four, and it might be possible, but I worry that it ended up with not enough room.

On three strings and with a barrel of about 12", I get about 110-115 FPS.  Perfect for HvZ!  And on two strings I get more like 70-80 FPS.

The cord I use is: https://www.amazon.com/gp/product/B0084EFED2/

Files are unfortunately not oriented for printing.  Sorry about that

Read more Show less

Print spec

Formats
stl
Model files
10
Total size
2.1 MB
Largest file
405.8 KB

0 comments

See all