
Neptune 4 Plus / Max – Bracket Dẫn Dây (Cable Routing Bracket)
- Downloads
- 111
- Likes
- 24
- Views
- 550
- Remixes
- 0
- Comments
- 0
Files 2 230.8 KB
- main_cable_side_holder_REV2b_1776461658.stlSTL · 91.1 KB
- x_cable_side_holder_vert_beta_REV3_1776461659.stpSTP · 139.7 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #306789
- Category
- Máy In 3D
- Published
Description
If your X + hotend cable flows pretty well and you don't see a need for a cable chain, but just need the cable to route downward instead of outward to save on space or prevent interference, you can use this clip.
Tested on Neptune 4 Plus. Should work fine on 4 Max. Probably will not fit on 4 / 4 Pro, and even if it does, it may make the cable too tight.
Print 3-4 walls, 3 top/bottom layers. Print flat. Do not use supports. Use flush cutters to remove the baked-in supports.
You will need 2mm longer screws. I think this would be M3x8mm needed.
UPDATE 20250908: I have been having issues with these breaking when printed with ABS due to the weak tabs. So I re-designed this to screw into the endcap instead. You'll need 1x M3x6 to M3x12 bolt to attach. If you want to try this version, use the REV3 model.
Print spec
- Formats
- stlstp
- Model files
- 2
- Total size
- 230.8 KB
- Largest file
- 139.7 KB
0 comments
You may also like 12 models
See all-

-

-
New -
New -
New -

-
New -

-

-

-

-


