
Qidi Plus4 Spool Holder Riser – Khối nâng giá đỡ cuộn filament 75mm
- Downloads
- 279
- Likes
- 35
- Views
- 1,111
- Remixes
- 0
- Comments
- 0
Files 1 183.2 KB
- Qidi_Spool_holder_Riser_V2_1776459539.3mf3MF · 183.2 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #306675
- Category
- Máy In 3D
- Published
Description
This part for the Qidi Plus 4 raises the height of your filament spool with 75mm for extra clearance of riser units like my own design or to use larger spools without a vented riser.
It is recommended to use more walls and higher percentage of infill, than you probably normally would use. This is to add extra strength to the part since it can fibrate somewhat when the Qidi Plus 4 prints at higher speeds..
The .3mf file contains 2 parts, one part is an integrated “break away” support, which you need to remove from the model when printing has finished.
Remove the black rectangular piece from the back of the printer and attach that to the riser block with the 4x M4x20mm allen bolts and 4 regular M4 nuts. The original bolts that held the spoolholder can be re-used to attach the riser block to the printer.
I printed this part with 8 walls and 25% grid infill
Hardware needed:
-
4x M4 20mm allen bolts
-
4x M4 nuts
If you want to support my work, feel free to buy me a coffee :)
Print spec
- Formats
- 3mf
- Model files
- 1
- Total size
- 183.2 KB
- Largest file
- 183.2 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-
New -

-
New -

-
New -
New -


