Giá đỡ tua vít cho hệ thống HSW - Bản Parametric

I included a Fusion 360 file so you can adjust the length of the bar in units equal to the spacing in the HSW system. Holds small and normal sized screwdrivers with a satisfying snap. The default size of the bar will hold ~12 clips if you storing smaller screwdrivers. Larger ones will require more space so use less clips. The bar attaches to the studs with M3x8 or 10 screws. 

Since printers vary in their tolerances, you may need to adjust your horizontal expansion for the holes on the studs to get the screws to secure properly. I've found 2.90mm is the sweet spot for all my printers.