Mô hình Christmas Tree Passthrough

This is a great and fun seasonal model that reflects the spirit of Christmas and the holidays! You can print this easily, and have an enjoyable time fidgeting and toying around with it! Make sure to put a good color scheme together when printing this model for better results and an all around better look! I would of done a red and green color scheme, but I didn't have any red filament. 🥲

Make sure to check out my patreon page! If you join for free you can receive (free) exclusive models only on my patreon! Also have access to more updates, polls, requests, and many other things!  [My Master Printer Patreon](https://patreon.com/MasterPrinter?utm_medium=unknown&utm_source=join_link&utm_campaign=creatorshare_creator&utm_content=copyLink)

Also the main filament I use is a PLA, I only use tougher filament for the ones that need to be more durable!

There is not much I really need to say except that make sure to apply this advanced setting for better results! 

 Advanced Setting: Also, if you want a better turnout for your print, and your using prusa slicer, got to ‘print settings.' Then go to ‘advanced settings’ and navigate down until you reach ‘XY Size Compensation.’ There turn it down to ‘-0.3’, this will help improve the print tolerances even further. Make sure to do this only for the inner piece!🤓

Print Settings:

Infill: 0%

Filament: PLA or PETG

Layer Height: Standard

Speed: Try slowing down first layer speed for better results!

Brim: NO

Supports: NO

Enjoy!