Vỏ bảo vệ cho màn hình Raspberry Pi Touch Display 2

A nice case for your 7" Raspberry Pi Touch Display 2 (https://www.raspberrypi.com/products/touch-display-2/ ) and a Raspberry Pi. Features easy access to the USB and Ethernet ports. 

Designed to use the M2.5 x 6mm screws included with the display to secure it into the case, though M2.5 x 8mm screws are a bit easier to use. The countersink is make large enough to allow most screw drivers to fit as well as a washer to give extra support. 

I have provided the case with a number of mounting options including VESA 75 and 100, and a 50mm x 50mm pattern with M3 and M4, as well as one without mounting holes. All of the mounting variants have a model for heat set inserts and for directly tapping the plastic. 

The only part that needs supports is the top of the cable channel, organic supports are recommended. I do not recommend supports for the mounting holes or the hexagonal vent.  The 3mf file is configured for the MK4s and has the supports generated.  

Requires a right angle adapter for the USB-C power connection to the Pi (Or a Micro USB adapter for older Pis).

https://www.amazon.com/dp/B0D327SP5F?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

UPDATE: Based on feedback I have a second version of all the configurations with more space around the glass front of the screen in case you have fitment issues.