Skip to main content
F3D
Mặt bàn đạp Simsonn có thể điều chỉnh 1

4 images

Dụng Cụ Tiện Ích

Mặt bàn đạp Simsonn có thể điều chỉnh

Remix of Mặt bàn đạp phanh (Brake Pedal Face) cho Simsonn Pro Pedal By JW693D

By FrenchyAU_862359

Downloads
132
Likes
21
Views
895

Files 8 4.2 MB

  • Clutch_face_1_1776311938.stlSTL · 888.9 KB
  • Clutch_face_2_1776311939.stlSTL · 951.8 KB
  • Brake_Face_1_1776311940.stlSTL · 455.2 KB
  • Brake_Face_2_1776311940.stlSTL · 860.5 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#301566
Published

Description

15/12/24 Update:
- Added a new throttle pedal replacement face, currently i designed it around some round head screws i had on hand as i didnt have enough M5 countersunk bolts that were long enough but i will update this at a later date with a second design for countersunk bolts to match with the others

06/12/24 Update:
- Added a small adapter like plate to the files, this has a flat and concaved side, after long use i noticed the brake pedal starting to rotate and move as the back of the pedal model is flat while the pedals frame is actually curved (atleast thats the case with the Pro Plus Pedals) so quickly designed this small concaved part used to go between the new brake pedal and the pedal frame, so far i have found this eems to be a lot more of a solid connection however i ahvent driven with it yet so i will update the files if adjustments need to be made, so far only compatible with the brake pedal, i will make a modification to suit the spacing on the clutch pedal tomorrow.

just a simple remix of AngryDutchmans pedal faces as requested by Dr Conflict to allow for some adjustment of the brake location, atm these designs are completely untested for as of the date of upload im still waiting for my simsonn pedals to arrive so i can print one myself, in the mean time i made 3 slightly different designs all with more holes for said adjustability, any feedback until i receive mine would be appreciated, also once i receive my pedals i do intend to adapt these pedal faces to also work with the clutch pedal but i need to wait till i have them so i can confirm the hole spacing

update: received my pedals so confirmed brake faces work on the brake and i designed and printed a variant to fit the clutch pedals as shown can confirm they fit fine

Read more Show less

Print spec

Formats
stepstl
Model files
8
Total size
4.2 MB
Largest file
1.1 MB

0 comments

See all