SV06 Dual 5015 Guinea pig version

       Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.

                      https://www.youtube.com/channel/UCBjyI1E1HROh1BAYgeRZy7g 

         Support my work: (click on image)

                                            https://www.buymeacoffee.com/savagelau

         You can get commercial license from here:  (click on image)

                                                  https://www.patreon.com/SavageLau

______________________________________________________________________________________________________________

Chatterbox:

This design is not final yet, it may not be perfect. I will be continue update. You may want to wait! 

Con:

You will lose around 6mm on the left of the x axis, 10mm on the right. The homing postion will be change! 

Dual 5015 are very loud. I can hear it from other room with door closed..

fan duct design still not perfect. On the rear right of the nozzle still not enough air flow. 

Read description before you start, you are responable for your filament.

Okay, here we are. Dual 5015, the hanging on the back is inspired by Scattered Collectables 5015 part cooling duct, which is best solution for mount location for this printer so far. 

This development process takes long time, initial design, test print, revising, test print again, revising again, testing on machine. Figuring out the tolrance, strength, style, and more…(Kills a lot of my brain cells) Finally a okay version is here, like I mentioned there still room for improving.  

You don't pay me for doing this, so be nice, be polite! 

You can find me on SOVOL FB group, Or if you have questions, suggestions, commons you can leave it here. I usually replay very quick, unless I don't like you :) 

Print Settings:

Okay, Most of the test print was done on different ED3 Pro. Which I think the tolrence should be very standard for everybody. There is not challenge part of this model to print. Just make sure you use brim for head, follow the orientation shown on the pic above. 

0.2mm layer height, 

70mm/s print speed, 

No support needed, NEED BRIM for "head"!! 

Suggest use PLA+, PETG, PC, CF, ABS. PLA may melt over time. 

Instruction instiall video: 

Need some bolts and nut to make it work. Detail shows on video with step by step guide. 

https://youtu.be/2nAV7mS2qhA