Bàn Gấp Gọn (Foldable Table) cho chuyến cắm trại

2024-aug-20:

• Added an alternative TableTop, without opening for cap opener
• Adjusted the thread for the lid, just a minor but the lid fits better

The parts are in print-position i.e. you don't have to arrange the stl files.

Note that the .3mf files are of different target, MK3S, MK4 and different plastics, PLA and PETG. You have to choose yourself.

The tabletop was printed with MK4 and Input Shape and PETG and .gcode, not .bgcode, due to a strange thing when printed with the binary .bgcode (It wants to change filament every now and then)

Make sure your printbed is clean so the tabletop doesn't warp!

(I had problems anyway … see the tabletop images)

Use PLA for the hinges for best results. I've printed the hinges in PETG but they clogged together (maybe because a lot of humidity now in august).

A round container can be glued to the back of the tabletop to be used for e.g. sd-cards and other small things

All the parts

It can be a bit tricky to attach the hooks 

Sorry about the wavy pattern on the table top (printed with MK4 and InputShape)

I have glued a rubber mat here so that glasses and plates don't slide off.