
Giá đỡ cuộn nhựa 3kg cho Qidi Plus 4
- Downloads
- 269
- Likes
- 47
- Views
- 2,132
- Remixes
- 0
- Comments
- 0
Files 7 16.4 MB
- cylinder_1776230828.stlSTL · 36.2 KB
- roller-bearing-assy_1776230829.stlSTL · 150.7 KB
- support-back_1776230830.stlSTL · 2.3 MB
- spool-shaft_1776230831.stlSTL · 3.3 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #300044
- Category
- Máy In 3D
- Published
- Tags
Description
***REVISED***
I had uploaded the wrong front-screw model … added proper one and also a small washer to retain the baril in place with the bearings when changing spools :)
Spool support with a cylinder on needle bearings to minimize friction because of the weight.
The wheel nut with front bracket is a print in place
Simply remove OEM support and install new one
I added a front support for non-raiser printer (i will upload my raiser model soon)
*** PRINT SETTINGS: ***
Layer : 0.2
Infill: 20% Tri-Hexagone recommend
4 top & bottom layers
Support only for small overhang on back support
In “OBJECTS MODE”, change needle bearings assy layers to 0.8
Use SCARF JOINT SEAM on cylinder for a better finish
Recommend ABS or PETG-CF ***No PLA***
Replace screw on back cover with M3x12 to screw lower back support in place
***NOTE***
Parts will not load flat on bed, align as in the pic …. full plate 13h print ;)
I will add different shafts that screws on back support for different size soon :)
Print spec
- Formats
- stl
- Model files
- 7
- Total size
- 16.4 MB
- Largest file
- 5.1 MB
0 comments
You may also like 12 models
See all-

-

-
New -
New -
New -

-

-

-

-

-

-


