PC Case - Vỏ máy tính ATX Compact tối ưu không gian

PC Case: I was building an inexpensive PC with a very tight budget. I sourced parts from Marketplace, eBay, etc which meant I ended up with some oddball hardware, but I still wanted it to be compact. So I made a case around an ATX board with an SFX PSU and lots of airflow. The tolerances could probably use some work but it did go together. I built this for myself but if it can be of use to others please enjoy.

Full size ATX Board

SFX PSU

120mm Fan mount

Cable Management Bay

Even a Voron Disco-On-A-Stick LED mount if you feel like adding some RGB

Uses m3 threaded brass inserts, m3 hammerhead t-nuts, and m3 flat countersunk screws.

Hole for a 12mm button at the front

Print settings for the mesh are in the photos.