Giá treo tường NanoBeam AC5 2Gen

Thank you for supporting me!

This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a small Donation or Buy me a Coffee. Thank you!

Printing

All parts can be printed without support. For the mounts, place wall side to build plate.

There are two options for the screw:

1. Use a metal M6 screw with thread length 60mm. Take care to not tighten the screw too much - the mount will break at a certain point.
2. Use Screw.stl. When printing the screw, print it horizontal - it will break quickly otherwise. In addition, I recommend drilling the printed screw into a metal M6 nut before using it. This will hone the thread so it does not damage the mount thread. 

25% infill makes sense for windy conditions. Select the mount stl matching the wall angle required. The photo attached shows the 45 degree version in foreground.