
CR-10(S) NG v1.2 - Chuyển đổi sang CoreXY
Remix of ENDER 3 NG v1.2 - Chuyển đổi coreXY By radkoko
- Downloads
- 17
- Likes
- 20
- Views
- 231
- Remixes
- 0
- Comments
- 0
Files 95 33 MB
- frame_bottom_front_left_body_cr10_cr10s_1775909670.stlSTL · 473.1 KB
- frame_bottom_front_left_cap_cr10_cr10s_1775909671.stlSTL · 147.6 KB
- frame_bottom_front_right_body_cr10_cr10s_1775909672.stlSTL · 473.1 KB
- frame_bottom_front_right_cap_cr10_cr10s_1775909674.stlSTL · 147.6 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #295577
- Category
- Máy In 3D
- Published
Description
CR10NG / CR-10 NG
version 1.2
REFER FIRST TO E3NG / Ender 3 NG
Check the Differences of the remix compared to the original section in this remix.
Files hosted here will be always up to date, changelog can be found below.
Printables is the main platform for hosting the official STL & STEP part files.
All the important informations, links, details, BOM and other things for the project are on the main website:
More information on CR-10 remix go to discord-> ENDER 3 NG -> user-mods -> CR10NG - Mod for CR-10 V1
Extrusion Labeling:
ABC
TYPE
SIZE
QTY
A
2040
460 mm
2
B
2040
500 mm
1 (CR10)
B
2040
509 mm
1 (CR10S)
C
2020
400 mm
2
D
2040
550 mm
2
E
2020
400 mm
1
F
2020
415 mm
1
G
2040
400 mm
2 (ULT-FRAME)
Bill of Material change:
NAME
PCS
NOTE
8 x 400 mm linear rod
2
X axis rods
8 x 500 mm linear rod
2
Y axis rods
12 x 450 mm linear rod
2
Z axis rods
12 x 420 mm linear rod
(1)
(Z axis rear rod ULT-FRAME) [cut to length]
T8/8 x 400 mm leadscrew
3
Z leadscrews
DIN rail 500 mm
2
(cut to 42 cm length) [steel is cool]
DIN rail 300 mm
1
[steel is cool]
note about remix drill guide frame_20_extrusion_drill_guide_bottom_cr10_cr10s
these are for extrusions A on the side of frame_bottom_front_body
CHANGELOG:
2026.04.05 - Milestone: all non-enclosure parts uploaded. Added parts:
FRAME - BOTTOM
frame_bottom_front_left_body_cr10_cr10s
frame_bottom_front_left_cap_cr10_cr10s
frame_bottom_front_right_body_cr10_cr10s
frame_bottom_front_right_cap_cr10_cr10s
frame_bottom_front_rod_lock_cr10_cr10s
frame_bottom_rear_body_cap_cr10s
frame_20_extrusion_drill_guide_bottom_cr10_cr10s
2026.04.05 - Added extrusion labeling image & table to description, and some Bill of Materials table addition.
2026.04.03 - Initial v1.2 posting an incomplete release. Missing parts:
FRAME - BOTTOM
frame_bottom_front_left_body_cr10_cr10s
frame_bottom_front_left_cap_cr10_cr10s
frame_bottom_front_right_body_cr10_cr10s
frame_bottom_front_right_cap_cr10_cr10s
frame_bottom_front_rod_lock_cr10_cr10s
frame_bottom_rear_body_cap_cr10s
Print spec
- Formats
- dxfstepstl
- Model files
- 95
- Total size
- 33 MB
- Largest file
- 2.1 MB
0 comments
You may also like 12 models
See all-

-

-
New -

-

-

-

-

-
New -
New -

-


