
Giá Đỡ 4 Cuộn Dây Tóc Gắn Bên Hông Cho CORE One/+
Remix of Phụ kiện Enclosure cho MMU3 (MMU3 Enclosure addon) By Prusa3D
- Downloads
- 10
- Likes
- 8
- Views
- 148
- Remixes
- 0
- Comments
- 0
Files 13 15.2 MB
- Base_Front-V1_1775876219.stlSTL · 2.2 MB
- Base_Back-V1_1775876220.stlSTL · 2.2 MB
- Nuts_Holder-V1_1775876221.stlSTL · 487.8 KB
- Arm-V1_1775876221.stlSTL · 187.2 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #295091
- Category
- Máy In 3D
- Published
- Tags
Description
Side-Mounted 4x Spool holder for CORE One / CORE One+ printers. Inspired by the INDX system’s side-mounted design, I couldn’t find a printable version, so I created my own — I hope you enjoy it!
Ideal for MMU3 setups. The PTFE tube holders are adjustable in direction or can be left out entirely, depending on your needs. Assembly is simple, with integrated nut holders on the inside for easy mounting.
I’m not a professional CAD designer, so there may be some minor imperfections — feedback and suggestions are always welcome. If you find this model useful, I’d really appreciate a like or a make, as creating it and writing the assembly guide took quite a bit of time.
Parts to print:
I used PETG for all parts with 15% infill, 0.2 layer height, 0.4 Nozzle, structural preset.
Print the following parts:
-
1x Base_Front
-
1x Base_Back
-
2x Nuts_Holder
-
4x Arm
-
4x Arm_Cap
-
2x Arm_Spacer
-
4x spoolholder-static from:
Mechanical parts:
You need the following mechanical parts:
-
Some PTFE tube
-
8x M3n nut
-
8x M3x10 screws
-
4x M3x8...10 screws
-
4x M3x18...20 screws
-
4x O-Ring 32*25*3,5 mm
or print them:
Assembly Guide:
You can find the assembly guide as a PDF in the files tab.
Print spec
- Formats
- 3mfbgcodepdfstl
- Model files
- 13
- Total size
- 15.2 MB
- Largest file
- 2.2 MB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -
New -
New -

-

-

-

-


