
Đế tản nhiệt laptop (cho máy > 16 inch)
- Downloads
- 1
- Likes
- 0
- Views
- 49
- Remixes
- 0
- Comments
- 0
Files 6 2.6 MB
- Laptopk_hlpad_Fu_1775631057.stlSTL · 491.3 KB
- Laptopk_hlpad_Controllerabdeckung_1775631059.stlSTL · 66.8 KB
- Laptopk_hlpad_Bodenplatte_1775631059.stlSTL · 168.9 KB
- Laptopk_hlpad_Deckel_1775631061.stlSTL · 209.3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #291574
- Category
- Dụng Cụ Tiện Ích
- Published
- License
- Creative Commons — Attribution
Description
A chunky laptop cooling pad for >16'' laptops.
I printed mine on an ECC1 with black PLA+ from Elegoo with 3 walls and 20 % cubic infill (took about 1.1 kg).
The assembly is straight foward once everything is printed. You need 12 x M3x35 and 20 x M3x8 screws, 20 x M3 heat inserts and 24 x M3 nuts.
You dont need to print the bottom plate, the frame is rigid enough to hold the top plate by itself (it would save about 400g of filament). I needed the bottom plate because I want to be able to place it on my lap comfortably (which works quite well).
I cut both the bottom plate and the top plate, that holds the fans, in 4 pieces in the slicer and simply glued them together using super glue. The frame was printed in two pieces for each side, that were also glued together using superglue. I used no connectors in the slicer and it worked beautifully.
I used three Arctic P12 Pro PST fans and a simple PWM controller with USB-C power supply (links below).
Top/bottom plate and the PWM controller-cover were screwed into the frame with M3x8 screws and M3 heat inserts.The fans were screwed to the top plate with M3x35 srews and two M3 nuts for each screw (the screws provided with the fans will not work with this design).
In the bottom plate and the side plate are canals to guide the wires. I stored the access cables behind the sectioning piece of the bottom plate.
I dont have a suitable Laptop yet (but plan on getting one soon), but my current laptop (not really powerful and not that hot anyways) is way cooler than without the cooling pad, even with the fans at 20 % PWM.
Links of the exact parts i used:
Fans: https://www.arctic.de/P12-Pro-PST-5-Pack/ACFAN00307A
PWM Controller: https://www.amazon.de/dp/B0G1MQ86J9?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
M3 Screws: https://www.amazon.de/dp/B0DQ41SK6C?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
M3 Heat Inserts: https://www.amazon.de/dp/B0D17FGQWW?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Print spec
- Formats
- f3dstepstl
- Model files
- 6
- Total size
- 2.6 MB
- Largest file
- 859.4 KB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-

-

-

-

-
New -

-


