Mô hình Hueforge Snorlax: Just Do It... Later

Project: Snorlax Do It Later.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 166.67x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm

#000000 PLA+ Sunlu Black Transmission Distance: 0.6
#2e4462 PLA Elegoo Matte Army Blue Transmission Distance: 0.1
#0163a6 PLA Panchroma Matte Sapphire Blue Transmission Distance: 0.1
#e8dbb7 PLA BambuLab Matte Desert Tan Transmission Distance: 1
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:

Start with Black
At layer #9 (0.8mm) swap to Army Blue
At layer #13 (1.12mm) swap to Matte Sapphire Blue
At layer #17 (1.44mm) swap to Desert Tan
At layer #22 (1.84mm) swap to Jade White for the rest.