Skip to main content
F3D
Tai nghe DIY CH3 với thiết kế driver đặt nghiêng 1

5 images

Dụng Cụ Tiện Ích

Tai nghe DIY CH3 với thiết kế driver đặt nghiêng

By Angst92_3914493

Views
85

Files 5 1.9 MB

  • Driver_Cover_Mirror_X-Axis_1775533264.stlSTL · 919.6 KB
  • Main_Body_Mirror_X-Axis_1775533266.stlSTL · 547.3 KB
  • Driver_Grill_1775533267.stlSTL · 149.3 KB
  • Pad_Plate_1775533268.stlSTL · 293.5 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Headphone design based around the Peerless Tymphony 50mm driver.

This is an in-progress experimental project trying out an angled driver design. 

I have modelled my own yokes to fit these cups and the capra headband. 

This project is part of my on going experimentation. I have tried to document what I have learnt here https://www.head-fi.org/threads/diy-3d-printed-headphone-journey.979090/

BOM:
Drivers - Peerless 50mm
Pads -     Brainwavz XL Hybrid
Cable Connectors - PJ392 3.5mm
Screws - M3 FHCS 6, 8 and 10mm
Threaded Inserts - M3 Heat Set
Adhesive - Double-sided tape

Instructions:
Earpads - The pad ring part fits inside the ear pads at the back to tension their mounting ring. The ear pads are then mounted to the ear cups using double-sided tape or other adhesive
Driver Grill - This can be attached inside the main body from the front opening and not the side the driver is inserted. Use superglue or some other adhesive.

Read more Show less

Print spec

Formats
stl
Model files
5
Total size
1.9 MB
Largest file
919.6 KB

0 comments

See all