Skip to main content
F3D
Bulong M4 đầu Philips 1

11 images

DIY

Bulong M4 đầu Philips

By Siff3D

Downloads
756
Likes
31
Views
2,052

Files 2 1,014.7 KB

  • nut_job_20221005-53-1d80khg_1775521652.stlSTL · 556.3 KB
  • M4_Bolt_Philips_nut_job_20221005-53-1d80khg_0.1mm_PLA_MK3S_6m_1775521653.gcodeGCODE · 458.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Customized version of https://www.thingiverse.com/thing:193647

Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=193647

Customizer Parameters

type = bolt
head_type = countersunk
drive_type = phillips
head_diameter = 8
head_height = 3
drive_diameter = 4
slot_width = 1
slot_depth = 2
texture = include
thread_outer_diameter = 4
thread_step = 0.7
step_shape_degrees = 45
thread_length = 8
countersink = 2
non_thread_length = 0
non_thread_diameter = 0
nut_type = normal
nut_diameter = 12
nut_height = 6
nut_thread_outer_diameter = 9
nut_thread_step = 2
nut_step_shape_degrees = 45
wing_ratio = 1
inner_diameter = 8
outer_diameter = 14
thickness = 2
facets = 6
socket_facets = 6
socket_depth = 3
resolution = 0.5

Update 20230627: Added .gcode file

Update 20250203: Added additional images, print settings and notes

Print Settings

  • Printer:                Prusa i3 MK3S+
  • Rafts:                    No
  • Supports:           No
  • Support type:    n/a
  • Nozzle:                 0.4 mm
  • Resolution:        0.1 mm
  • Infill:                     15%
  • Infill type:           Gyroid
  • Filament:            PLA, PETG*

Printed in: Spool3D Gray PLA, Polymaker PolyLite Yellow PETG

Notes:
Print as shown. Tolerances are very tight and I would recommend after printing to use a metal M4 nut to clean the thread, especially if the bolt will be used with a 3D printed nut.

* Note that, if printed in PETG and using with nut also printed in PETG, they’ll bind much more than if printed in PLA, so I would recommend slightly reducing the size of the bolt on both the X and Y axis to 99% and enlarging the nut on both the X and Y axis to 101%.

Read more Show less

Print spec

Formats
gcodestl
Model files
2
Total size
1,014.7 KB
Largest file
556.3 KB

0 comments

See all