Skip to main content
F3D
Giá đỡ cố định cáp Parametric cho máy đùn Sherpa Heavy hoặc… 1

2 images

Máy In 3D

Giá đỡ cố định cáp Parametric cho máy đùn Sherpa Heavy hoặc Extra Heavy

By JordanK_858807

Downloads
116
Likes
34
Views
673

Files 5 3.8 MB

  • Sherpa_Heavy_Cable_Management_1775520783.f3dF3D · 289.9 KB
  • 40mm_Stepper_with_cutout_1775520784.stlSTL · 1 MB
  • 34mm_stepper_1775520785.stlSTL · 836.3 KB
  • 26mm_Stepper_1775520786.stlSTL · 886.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Sherpa Heavy or Extra Heavy Extruder Cable Management Strain Relief

I recently installed the Sherpa “Extra” Heavy extruder on my CoreXY Converted RigidBot Printer, but I needed a way to keep the cables nice and tidy and reduce strain on the cables.

This model accomplishes both of those things. It is held to the stepper motor with one or two M3 screws, and uses two zip ties to keep the wires attached.

I also made a modification to the rear housing if you are having the same shaft bearing clearance issue that I did.

Parameters:

If you need to, there is only one parameter to edit. Just input the height of your stepper motor.

Printing:

This model can be printed in its current orientation with no supports.

Add a brim to aid in bed adhesion, and even if printing with ABS, turn the fan on for overhangs and bridges (otherwise the top gets droopy).

Read more Show less

Print spec

Formats
f3dstl
Model files
5
Total size
3.8 MB
Largest file
1 MB

0 comments

See all