
Mô hình xích 1000+ mắt - Tổng chiều dài 10m
Remix of Mô hình xích 100+ mắt xích (100+ link chain) By aspiring_maker
- Downloads
- 3
- Likes
- 1
- Views
- 100
- Remixes
- 0
- Comments
- 0
Files 2 64.3 MB
- chain_36x34_33_links_1775403736.scadSCAD · 2.9 KB
- chain_36x34_33_links_1775403737.stlSTL · 64.3 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #288292
- Category
- DIY
- Published
- License
- Creative Commons — Attribution
Description
After learning how to print 10 rows of 10 links with alternating end links to form a continuous chain (see 100+ link chain), the obvious question is how far can I go? The answer: 34 rows of 36 links with 33 links on alternating ends for a total of 1257 links!!! The estimated length is 10.056m!!!
Supports are required because the links are so small and have very little contact with the bed. Also, I had to use snug supports because the grid and organic supports include a brim that extended beyond the print bed limits. For organic supports, I had to reduce the model to 34x32+31 (1119) links.
I've included the scad code, so feel free to install OpenSCAD and experiment!! See 100+ link chain for more details. https://openscad.org/
prusa slicer settings: 0.15mm Quality, PLA, supports everywhere, 100% infill, no brim, Filaments > first & other layers 65C, print settings > skirt & brim > skirt loops = 0, brim type = no brim, Support material > overhang threshold = 0, raft layers = 3, raft expansion = 0.5, support material style = snug.
Any suggestions on what I should try next?
Print spec
- Formats
- scadstl
- Model files
- 2
- Total size
- 64.3 MB
- Largest file
- 64.3 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-
New -

-

-
New -
New -


