TPU Patches - Miếng dán y tế tactical

A set of TPU tactical medical patches.

The models are designed for manual color swapping so no AMS/MMU/Multi-Toolhead is needed, simply set the slicer to pause at the beginning of layer 11 (for 0.2mm layer height), manually change the filament to a separate color after the pause, and resume printing.

The included 3MF files use very slow print speeds since that's the only way I can get even high flow TPU to print reliably. If you have better settings that work for you, feel free to change them. Credit to sanctusbimbam on MakerWorld for the TPU settings.

Patches Included:

1" Blood Type Indicators

1" Medical Cross

1" "NKDA"

1" "Medical"

2" "Medic"

2" Medical Cross

Required Materials:

1 inch / 25mm or 2 inch / 50mm Adhesive Velcro

Recommended Print Settings:

Material: TPU

Layer Height: 0.2mm

Wall Line Count: 4

Infill Percentage: 20

Support: No

Extra: Set a pause at the beginning of layer 11