
Giá đỡ chân máy sấy filament Fixdry cho K1 Max
- Downloads
- 74
- Likes
- 13
- Views
- 1,678
- Remixes
- 0
- Comments
- 0
Files 1 129.8 KB
- Fixdry_Filament_Dryer_Leg_Legs_for_K1_5.25_in_lift_1766457779.stlSTL · 129.8 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #28624
- Category
- Máy In 3D
- Published
Description
I designed these legs when I realized that the filament tube that comes with the K1 Max would not reach the output port of the fixed dry filament dryer. These legs raise this particular dryer 5 1/4 inches. The legs are very strong but mostly hollow with invisible internal supports, I would print these at 15-25% infill, but remember they are not using as much plastic as it would seem.
On the K1 Max they print at about one hour and two minutes each if done and a batch of four. On the same machine they print at about one hour and 20 minutes apiece individually.
I printed these with Creality Hyper PLA (This is an update although I printed them with hyper PLA to print very quickly, they ended up being fragile in the long run I would recommend something a little bit tougher, for instance PLA plus.)
2 walls.
4 top & bottoms.
I have included pictures of the fixed dry dryer connected to the K1 max printer.
They work together wonderfully as a combination. What you can't see is the 2nd bowden tube heads to my Ender 2 which I am currently using to print TPU. It's kinda fun printing with two separate machines out of the same filament dryer.
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 129.8 KB
- Largest file
- 129.8 KB
0 comments
You may also like 12 models
See all-

-
New -
New -

-
New -

-

-

-

-

-

-


