Bình oxy dùng trong mô phỏng y tế

This model represents an oxygen pressure cylinder designed specifically for use in medical simulation environments. It allows users to connect an oxygen delivery tube and set the oxygen flow rate by adjusting and reading numeric values on the interface.

On the side of the model, there is an option to include a safety valve. Adjacent to it, there is a designated space that can be used either for labeling (e.g., identification number) or for attaching a simple mock gauge/indicator.

Printing Instructions

• Recommended material: PETG

• Number of perimeters: minimum 3 (recommended 4)

• Layer height: 0.2 mm

• Supports: Only the top part requires supports (organic supports recommended)

Assembly Instructions

• The first and second parts of the body must be bonded together using super glue.

• For increased durability, use the 4 alignment pins included in the model.

If you have any questions, feel free to reach out. I hope this model brings new energy and addes value to your teaching.