Bộ khuếch tán nước cho hồ cá (Aquarium Water Change Diffuser)

By MarkIgnatiev_1625039

Downloads: 1,203
Likes: 168
Views: 4,366
Remixes: 0
Comments: 0

Download all (.zip)· 6 files · 412.8 KB· 412.8 KB

Files 6 412.8 KB

Large_Aqua_Diffuser_30mm_1775259622.stlSTL · 79 KB
Medium_Aqua_Diffuser_20mm_1775259623.stlSTL · 76.5 KB
Large_Aqua_Diffuser_20mm_1775259623.stlSTL · 78.9 KB
Medium_Aqua_Diffuser_30mm_1775259624.stlSTL · 76.5 KB
Small_Aqua_Diffuser_20mm_1775259626.stlSTL · 50.8 KB
Nano_Aqua_Diffuser_20mm_1775259626.stlSTL · 51.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #285216
Category: Đồ Gia Dụng
Published: 04/04/2026
License: Creative Commons — Attribution — Noncommercial — Share Alike
Tags: aquarium
aquariumaccessories

Description

This diffuser prints upside-down and does not require supports due to the 45 degree slope and angled diffusion holes. Plenty of perforations on all sides to let the water out quickly while not disturbing the bottom of the aquarium. Feet keep the diffuser level and create a space for additional water to flow out towards the aquarium wall.

Six versions are available:

For up to a 20mm aquarium rim:
- Nano - 60mm x 50mm x 105mm
- Small - 80mm x 70mm x 125mm
- Medium - 100mm x 100mm x 150mm
- Large - 130mm x 110mm x 160mm
For up to a 30mm aquarium rim:
- Medium - 100mm x 100mm x 150mm
- Large - 130mm x 110mm x 160mm

Prints well in PLA with .24mm layer thickness, 4 walls and 15% infill.