Khay đựng 16 đầu hàn Gridfinity có khóa chống rơi

About

• I wanted to have more compact version for more tips with option that tips will not fall off if held sideways or upside down.

• I took original ‘Bin - 1x1x3 - pmcquay.stl’, added fill and holes with tiny locks inside the holes that help to keep those tips in place.

Please give a like and post makes and provide comments for further improvements.

Known limitation

• if some tips still fall off then I suggest to add a tiny drop of hot glue on the wall of the hole and putting tip into it. Usually those are very thin like less than 6.5mm

• if your soldering iron tip do not fit at all then you can use a drill to make a hole a bit bigger, but better have more perimeters than 4.
   

Dimensions:

• width: 42mm (gridfinity)

• depth: 42mm (gridfinity)

• height: 3 units of gridfinity height

• magnets 6x2mm

• holes 7mm wide

Print:

• notice gcode contains moves for my custom timelapse video capture (print head moves to back and then to Z axis), so provided gcode file is just for rough estimation of the print time + required filament,

• I suggest 0.2mm layer height, 0.4mm nozzle, otherwise tolerances may be way off.

• infill whatever you like but 10% is enough

• no supports, no brim