Compact Tripod XS - Chân máy ảnh siêu nhỏ gọn

This is an XS version of the tripod I re-designed inspired by Kernel770's tripod. It was primarily designed for those with really small 3.5in³ printers and has shorter legs. In all other aspects it is identical to my larger tripod.

It can handle a heavy DSLR with heavy lens and is so small it can stay on the camera. :)

The camPad is printed in flexible TPU and the rest in ecoPLA.

The 1/4-screw is held in place by a small piece of filament glued in place by CA-glue.

Support is recommended when printing camMount.

Using toothed washers with external-tooth is recommended for heavy setups but is otherwise not needed.

As always, if you find it useful a tiny donation goes a long way to show appreciation. :)

Hardware needed:
1 pcs M5x50 hex-head screw
1 pcs M5 nut
2 pcs M5x10 countersunk screws
2 pcs M5 Nyloc nuts
1 pcs 1/4 10mm screw (
http://www.amzn.de/dp/B00OOLKD3K
)
2 pcs M5 toothed washers (external-tooth)

Print instructions

See attached 3mf-file. I've printed successfully in PLA and PETG. Print the pad preferably in flex material like TPU.

If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.

https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6