Skip to main content
F3D
Tấm ốp cắt laser cho dòng máy Creality K1 1

4 images

Large file collection Máy In 3D

Tấm ốp cắt laser cho dòng máy Creality K1

By 3DPHUB

Downloads
354
Likes
55
Views
1,757

Files 24 547.5 KB

  • K1-K1C-K1SE_TOP_PANEL_SLOT_1775129091.dxfDXF · 15.4 KB
  • K1-K1C-K1SE_LEFT_PANEL_SLOT_1775129092.dxfDXF · 30.6 KB
  • K1-K1C-K1SE_RIGHT_PANEL_SLOT_1775129093.dxfDXF · 29.3 KB
  • K1-K1C-K1SE_FRONT_PANEL_SLOT_1775129094.dxfDXF · 15 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#281888
Category
Máy In 3D
Published
License
Standard Digital File License

Description

Upgrade your K1SE with side panels or repair your K1 / K1C / K1MAX

I recommend using the plain panels if you plan to print high temp filament or want to keep the sound and fumes down, but have provided semi-open designs to combat heat creep for PLA while still keeping pets and small hands out.

These are too large to print. You must get them laser cut. I recommend 3mm thick clear polycarbonate. Corners have a 3mm fillet for machining.

  • Plain - Sealed version for enclosing the printer to print high temp filaments

  • Spider - Open for PLA printing. Matches the spider shroud.

  • Honeycomb - Open for PLA printing.

  • D3D - Semi-Open for PLA printing. Matches other D3D mods. 

  • Slotted - Open for PLA printing. 

Now you can match the theme of your other mods such as the cyclops, carto, spider shroud, bed fans, advanced nozzle wiper and more! 

Please double-check the height measurements for the left and right panels. It appears that there are two different printer versions with a 7mm difference. the K1 max files provided are for 485mm panels

The K1SE has braces. You may need to use washers or remove them. Slight modification (sanding) may be needed

Read more Show less

Print spec

Formats
dxf
Model files
24
Total size
547.5 KB
Largest file
67.1 KB

0 comments

See all